Home Page | Products | Sales | Feedback | Contact Us |

Handheld Microphones
Wireless Microphones
Gooseneck Conference Microphones
Tie-clip and Instrumet Condenser Microphones
Headset and Earset Microphones
Drum Microphones
Saxophone Microphone And Hanning microphone
Broadcasting and Recording Microphones
Interview Microphones
Microphone Accessories
Model BR-1A

Transducer Principle: Pressure Gradient Combination; Polar Pattern: Uni//Omni; Frequency Response: 20Hz-20kHz; Sensitivity: -34dB/-36dB±2dB(0dB=1V/Pa at 1kHz); Output Impedance: 250Ω±30% (at 1kHz); Equivalent Noise Level:≤15/16 dB A; Max. Input SPL: 135dB (at 1kHz ≤1% T.H.D) 145dB (with 10dB pad Bass Filer:100Hz 10dB/octave; Phantom Power Requirement: 48V DC Phantom Power
multiple polar pattern(Uni/figure8/Omni) ·gold-plate diaphragm capsule---to assure low self-noise, high output and the accurate reproduction of even the subtlest sounds, especially high frequency signals not easily reproduced by conventional large diaphragm condenser transducers ·switchable 10dB built-in(nominal)pad and low frequency attenuation----to enable easy handling of very high sound pressure levels and the successful reduction of the pickup of low frequency ambient noise (especially common while on-stage performing) ·undistorted reproduction of high sound pressure level signals at all frequencies ·integrated three stage mesh grille---to protect the microphone from accidental damage and reduce plosives and breath noise ·standard XLR-3P(F) connector---to match all kinds of audio equipment applications: TV studios, recording studios, broadcasting stations, stage performances, percussion and guitar recording
Clicks:1277    Forword Picture : Back Picture

Copyright©TianTuo Electronics Technology Co.,LTD 粤ICP备06010430号

        Tel:0086-20-86059786  or  0086-20-36200770 or 0086-20-86059681        
     Fax:0086-20-86059452  Website Explorers[
3107 ]